|
|
|
|
|
|
|
|
The simplicity of design and quality of engineering
employed in the OID Optical
Interface Detector mean there are no moving parts. Fiber optics
within the patented optical probe respond to the absorption,
fluorescence, and refractive properties of the fluid which is turned
into an analog signal, or "optical signature."
Measurement is fully automatic without the need for operator
intervention or supervision. The output signal can be sent to the SCADA,
PLC’s, or to a Central Control Room for logging or display on chart
recorders or monitors.
Placing a preview OID sensor upstream and another at the station gives
you the time and intelligence regarding the interface to always make the
most advantageous cut.
The OID sensor can be installed in an analyzer loop or in the main
line, and because it’s easily mounted through a full-opening ball valve,
you can insert or retract the probe without having to ever drain the
pipe.
FEATURES
• User friendly
• Low power
• Explosion proof
• Low maintenance
• Lens cleans in place
APPLICATIONS
• Batching
• Interface
• Production
• Transmix/regrade reduction
• Quality control
SPECIFICATIONS
Media: Refined products
Material: Wetted parts–316 stainless steel
Power: 12–24 VDC 10 Watts max
Output: 4-20 mA
Fluid temperature: -40º to 160ºF (-40º to 70ºC)
Electronics temperature: -40º to 160ºF (-40º to 70ºC)
Pressure ratings: ANSI 150, 300, 600, 900
Mounting: 3/4" and 1" MNPT
2" MNPT Seal Housing
2", 3", or 4" Flanged Seal Housing
EX enclosure: 3" x 6" x 3" (76mm x 152mm x 76mm)
Shaft length: 12" to 60"
Pipe size: 3/4" to 48"
Weight: from 10 lbs. (4.5kg)
|
|
OID with MNPT seal housing
OID with 1" MNPT for analyzer or densitometer loop
|
|
|
| |
